Low Carbon Steel Wire Mesh Disc

Material:
low carbon steel wire, high carbon steel wire

Characteristics:
±3% aperture tolerance
perfect flatness/ squareness
superior mesh evenness/ tightness

Wire Diameter:
0.132-0.61mm
Aperture:0.18-1.93mm
End Types: Flat Screen/ Wrapped or Hooked

product characteristics
• Flat mesh surface, tightly weaved;
• Uniform mesh opening, high accuracy;
• Reliable filtration accuracy;
• Long life time.

E-mail： haotong2@ht-wiremesh.com
Whatsapp / Wechat: 86-15533962802

Low carbon steel wire mesh is the most common plain steel alloy used in manufacturing industrial wire cloth screens due to its tensile strength and high impact resistance. Primarily comprised of iron, low carbon grades 1005, 1006, and 1008 are the most frequently used, and contain small percentages of carbon (0.0-0.1%), manganese (0.0-0.5% – which increases its strength), phosphorous (0.0-0.04%), and sulfur (0.0-0.05%). Low abrasion resistance and low corrosion resistance may limit usage in certain applications, however a wide variety of special protective coatings may be applied to improve resistance. Galvanizing (before or after) is the most economical way to protect against corrosion. Alternatively, a protective tin coating is often used on mud grade screens (tinned mill). In addition, steel wire cloth can be protected with epoxy coatings, PVC/vinyl coatings, and our electrostatic application of powder coating. Some characteristics of low carbon steel wire cloth which dictate its wide use are:
• Low carbon plain steel alloy.
• Relatively low cost and high strength material.
• Magnetic in all conditions.
• Not corrosion resistant; rusts in most atmospheric environments.
• Protective coatings can be applied to improve resistance.
• Can be cut, formed, and welded.
Industries & Applications
Low carbon steel wire mesh is used across a wide array of various industries and applications due to its relatively low cost and high strength.

Carbon Steel Wire Mesh – Typical Chemistry
Mesh (Mesh/ Inch)	Guage(#)	Wire Dia. (mm)	Opening (mm)
10	23	0.61	1.93
12	24	0.55	1.566
14	25	0.51	1.30
16	26	0.45	1.13
18	29	0.35	1.06
20	26	0.46	0.81
20	27	0.416	0.85
20	31	0.295	0.97
24	29	0.35	0.708
30	31	0.295	0.55
30	30	0.315	0.53
30	35	0.213	0.63
40	32	0.274	0.36
40	33	0.254	0.38
40	34	0.234	0.40
40	35	0.213	0.42
40	36	0.193	0.442
50	34	0.234	0.274
50	35	0.213	0.29
50	36	0.193	0.31
50	37	0.172	0.33
56	36	0.193	0.26
56	37	0.172	0.281
56	38	0.152	0.30
60	37	0.172	0.25
60	38	0.152	0.27
80	39	0.132	0.18
The width of the low carbon steel mesh can be range from 0.6m to 1.5m at any length. Other specifications can be produced per customers’ request.